Safety Workshops & High~School Training

Working Alone is a safety consideration often overlooked

Participants will learn:

Provincial & Federal Legislation for working alone

Workplace Responsibilities 

Who is at-risk?

What are the risks?

What should the Employer do?

What should You do?

What You should NOT do!

There is no Practical component

Typically 1.5Hrs 

Standard Passing Grade = 75% 

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Pedestrian Safety & Awareness is a topic often overlooked, until someone gets hurt, then there's a lot of conversation about what could/would/should have been done...  why not help pedestrians "be aware" before an incident!

Participants will learn

What is Awareness?

Where should I look?

What are the common hazards?

Where should / shouldn't I be or walk?

How should I move around the workplace? 

How can I be protected?

Solutions to risks

Legislation for Awareness, Training & Warning systems

There is no practical component or test 

Typically 1.5Hrs

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Workplace Inspections must be done every month

Participants will learn:

When to do Workplace Inspections?

Who does inspections?

Who can help on inspections?

Where do you inspect?

What do you look for?

Who do you notify what you found?

Safety Rep & Committee specifics

This Workshop is available in 3 formats:

Federal & Ontario 

Federal Only

Ontario Only

Course is Theory & short sample inspection: no test

1.5 to 2.5Hrs

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Often referred to as Fire Safety, this expanded version: Emergency Safety, will address numerous types of Emergencies that may happen in a workplace

Participants will learn:

What Emergencies may happen?

What is a Fire / Emergency Warden?

What does a Warden do?

What are your duties in an Emergency?

Secure-in-Place

Notification Requirements

Return to Premises

There is no practical component

Typically 2Hrs

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...    

People often say "how do I find the answer in Legislation" or "what does that mean?"

Participants will learn:

What are the different types of Legislation?

How is Legislation commonly structured

How do I find the Passages? 

How do I build a statement? 

What does it mean?

How Legislation is updated

How Legislation cross-references other Legislation

There is no Test however there is in-course Activities

Typically 1.5Hrs

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...    

Have you ever actually used/discharged a Fire Extinguisher before?

Participants will learn: 

What are the 4 Methods to Extinguish a Fire?  

What are the 5  Extinguisher Classes?  

What are the 4 Extinguisher Types?  

How do I inspect an Extinguisher?

How do I  use an Extinguisher?  

How do I maintain an Extinguisher?  

When do I run-away?  

Course can be Theory-Only - or - with Fire Simulation however this will extend time  

*Note: Client will be responsible to provide & recharge extinguishers - or - extra charges may be incurred to rent a "Simulator"

Typically 2.5Hrs with Simulation

Standard Passing Grade = 75%

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...    

A Fire Warden: often referred to as an Emergency Warden, has a number of responsibilities

Participants will learn:

Common Duties of a Warden

Designated Meeting Points

Secure-in-Place

How Fire Works?

Sounding the Alarm

Fire Extinguisher Basics

Reporting Requirements

Return to Premises 

There is no practical component unless Fire Extinguisher Training is added

Approx. 1.5 to 2Hrs

Standard Passing Grade = 75%

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...    

Ladder Awareness Training is both a Federal & Provincial requirement

This is a "trimmed-down" version of the Standard Ladder Safety course

Participants will learn:

Legislation

Training requirements

Categories & Types of Ladders 

Ladder Inspection

Common Hazards & Controls

Ladder Set-Up & Usage

Ladder Care, Maintenance & Storage

A short practical demonstration is included

Standard passing grade = 75%

 This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

*Note: an Extended edition is forthcoming...

Basic Ergonomics introduces the concept to the average person to increase awareness of what Ergonomics is and how it may affect them

Participants will learn:

Ergonomic Focus & Intent

Types of Ergonomics

Ergonomic Factors

12 Ergonomic Principles 

Ergonomic Assessment Process

Injuries

Benefits

Prevention

Short in-session demonstrations may be included

Session is approx. 2 - 2.5Hrs

Standard passing grade = %75

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

*Note: a more in-depth half-day program is forthcoming...

Basic OH&S for Workers will educate participants about Rights, Responsibilities, Powers & Duties of:

Constructor

Employer

Supervisor

Worker

H&S Rep/JHSC, etc...

You'll learn about:

3 Basic Rights

No Reprisal/Punishment

JHSC Meetings

Workplace Inspections, etc...

Session is approx. 2-2.5Hrs

Standard passing grade = 75%

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Work Area Protection (WAP) / Book 7 Overview safety training educates participants how to set-up operations on the side of the road.  Pylons, Cones, Barrels,  Delineators, Barriers, etc...how many, what size, how far apart & how much notice does the motorist/road user need

WAP / Book 7 is a Provincial requirement

This is an overview version of the full-day course with both in-class & hands-on practical components 

(outdoors weather permitting)

(indoors if enough space is available) 

This would be good as a refresher for people who've taken the full WAP course

Session is approx 2.5Hrs

Standard passing grade = 75%

 This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Under WAP / Book 7, a Traffic Control Person (TCP) manages traffic & pedestrian flow/access through a Work Area

WAP / Book 7 is a Provincial requirement & TCP's are governed in the Construction Regulations 213/91

This TCP-specific version has both in-class & hands-on practical components 

(outdoors weather permitting)

 (indoors if enough space is available)  

Session is approx 2.5Hrs

Standard passing grade = 75%

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Are you a Teacher / Trainer of Adults?

Do you deliver training courses at your workplace? 

Do you deliver/host meetings, information sessions & lectures?

Well, if you do, then understanding Adult Learning Principles is essential for you to help improve the delivery of your message/course!

Participants will learn:

• Adults as Learners 
• Learning Theories
• Learning Styles
• Learning Principles 
• Instructional Tools
• Trainers Tools

This course is approx. 3hrs when delivered in-person/virtually...

There is no written test however there is an in-course exercise 

 This Workshop may be held stand-alone, or, bundled together with other Workshops...    

The Slip, Trip & Fall Workshop introduces participants to the hazards of ST&F

Participants will learn:

Legislation

Hazards

Difference between S, T & F

Hazard Types & Controls

What they can do about it!

This Workshop is typically 1.5Hrs...

There is no written test or practical evaluation, however a short workplace tour is recommended...

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...

The Calculating Risk Workshop will present several methods to calculate risks in the workplace

Typically focused on Safety Risks, the methods presented can be used to calculate risk in other areas such as: finance, investment, acquisition, projects, etc... 

Participants will learn:

Responsibilities

Parameters

Scale / Weight / Value

Application

Samples

Re-Calculate

Controlling Risk

 This Workshop is typically 2Hrs...

There is no written test however in-session sample calculations will be conducted...

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops... 

 The Contractor Management Workshop will present seven steps to manage Contractors in the workplace

 Participants will learn:

Attracting Contractors

Researching Contractors

Qualifying

Assigning Work

Monitoring Contractors

Reviewing Work performed

Contractor Release

There is no written test 

This Workshop is typically 1Hr... 

 This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...  
 

 The Waste Manifesting Workshop is necessary for anyone who ships Hazardous Waste & is a good compliment to TDG Training 

(TDG should be taken 1st)

Participants will learn:

What is Hazardous Waste

Definitions & Legislation

Responsibilities / HWIN

Packaging & Treatment

Manifest Contents & Completion
 

This Workshop is typically 2.5Hrs...  

There is a short written test...  

Standard Passing Grade = 75%

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...  

 The Propane Handling Workshop is necessary for anyone who handles (exchanges) Propane cylinders on a variety of different equipment

Participants will learn:

What is Propane

The Origins of Propane

Legislation

Various Uses

Propane Risks

Safe Handling

Propane Storage

Device-Specific Modules Include:

Tiger-Torches

Construction Heaters

Bar-B-Ques

Pyrotechnics

Forklift / MEWP / Zamboni

(Modules are forthcoming) 

 This Workshop is typically 2.5Hrs but may be up-to 4Hrs if several Modules are selected (half-day rate applies) 

There is a short written test...  
Standard Passing Grade = 75%

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

The WV&H Workshop is one of the 5 required programs for all Employees 

This Workshop Edition would be great as a refresher for Employees who have already taken WV&H, Safety Committee Members or for High School Students to introduce them to the topic and requirements 

Federal & Provincial Legislation is cited

Participants will learn: 

Legislation & Definitions

Rights & Responsibilities

Contributing Factors

Risk Assessments

Program Elements

Training Requirements

Response Plans 

Case Studies are used

This Workshop is typically 2.5Hrs   

There is a short written test...    

Standard Passing Grade = 75%  

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

This course is an add-on for Forklift Training - or - meant for Pedestrians that are elevated in Approved Pedestrian Cages.  

This course may be 45 minutes when delivered in-person/virtually...

There is no written test or practical component 

 This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...    

Just in-time for the Winter...

Propane Torches & Heaters are used in numerous ways to keep spaces warm, prevent infrastructure freezing, heat only a specific area, or to keep materials from freezing...

Participants will learn:

• Detailed properties, hazards & requirements for Propane
• Different types of Torches & Heaters 
• Equipment inspection 
• Equipment usage
• Lighting/igniting equipment 
• Safety Do's & Don'ts 
• Storage of Propane Cylinders & the equipment 

There is a written test: Standard Passig Grade = 75%

A practical demonstration could/should also be scheduled  

This course could be split-up if you only want/need 1 topic

This course could become a half-day program if you cover both pieces of equipment and conduct practical demonstrations of both pieces of equipment

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Road / Driver Fatigue...  Information for anyone who needs to Drive as part of their Employment..

Training covers:

- What fatigue is

- What happens when a Driver is fatigued

- What can be done about it: short & long-term..

This course can also be useful for people who drive long distances for personal/recreation purposes...

The course is available in 3 ways:

- 24/7/365 on my Learning Management System (LMS) 

- Instructor-Lead Training (ILT) in groups of 12 or more

- Virtual Instructor-Lead Training (VILT) in groups of 12 or more

There is no written test or practical component

This Workshop may be held stand-alone, or, bundled together with other Safety Workshops...   

Coming Soon !!!

Coming Soon !!!